LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 813 (Engine Mechanical) >> Fuel Injector And Fuel Tube >> Removal and Installation >> Inspection After Installation >> Check on Fuel Leakage

Check on Fuel Leakage

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "ON" (with engine stopped). With fuel pressure applied to fuel piping, check for fuel leakage at connection points.
    NOTE: Use mirrors for checking at points out of clear sight.
  2. Start engine. With engine speed increased, check again for fuel leakage at connection points.
    CAUTION: Do not touch engine immediately after stopped, as engine becomes extremely hot.