LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 813 (Engine Mechanical) >> Drive Belts >> Removal and Installation >> Drive Belt >> Removal

Drive Belt: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove air duct and resonator assembly (inlet). Refer to "REMOVAL ".
  2. Rotate the drive belt auto tensioner in the direction of arrow (loosening direction of tensioner) as shown, using suitable tool.
    CAUTION: Avoid placing hand in a location where pinching may occur if the tool accidentally comes off.
    Fig 1: Loosening Direction Of Tensioner
    G04893979Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Remove the drive belt.
scientia non olet · About LEMON Manuals