LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 813 (Engine Mechanical) >> Cylinder Block >> How to Select Piston and Bearing >> How To Select Piston >> When New Cylinder Block is Used

When New Cylinder Block is Used

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Check the cylinder bore grade ("1", "2", or "3") on rear side of cylinder block, and select piston of the same grade.

NOTE: Piston is available with piston pin as a set for the service part. (Only "0" grade piston pin is available.)
Fig 1: Identifying Bearing Housing Grade
G04894237Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals