LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 813 (Engine Mechanical) >> Cylinder Block >> How to Select Piston and Bearing >> How To Select Connecting Rod Bearing >> When New Connecting Rod and Crankshaft are Used

When New Connecting Rod and Crankshaft are Used

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Check pin journal grade ("0", "1", or "2") on front of crankshaft, and select connecting rod bearing of the same grade.

NOTE: There is no grading for connecting rod big end diameter.
Fig 1: Identifying Journal Diameter Grade
G04894239Courtesy of NISSAN MOTOR CO., U.S.A.