How To Read Harness Layout

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

The following Harness Layouts use a map style grid to help locate connectors on the drawings:

Main Harness and Console Sub-harness
Engine Room Harness (RH View) Engine Compartment and Generator Sub-harness
Engine Room Harness (Passenger Compartment)
Engine Room Harness (LH View) Engine Compartment
Engine Control Harness, Injector Sub-harness, Ignition Coil Sub-harness, and Knock Sensor Sub-harness
Chassis Harness and Trailer Sub-harness

Fig 1: Identifying Example Of Harness Layout
Body Harness
Body No. 2 Harness and Rear Blower Motor Sub-harness
Room Lamp Harness
Back Door Harness, Back Door No. 2 Harness, Rear Window Sub-harness, and Rear Window Defogger Sub-harness

To use the grid reference

Find the desired connector number on the connector list.
Find the grid reference.
On the drawing, find the crossing of the grid reference letter column and number row.
Find the connector number in the crossing zone.
Follow the line (if used) to the connector.