LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 810 (Automatic Air Conditioner) >> Trouble Diagnosis >> Magnet Clutch Circuit >> Inspection Flow

Inspection Flow

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. CONFIRM SYMPTOM BY PERFORMING OPERATIONAL CHECK - MAGNET CLUTCH 
    1. Turn ignition switch ON.
    2. Press vent switch ( ).
    3. Press the A/C switch.
    4. Display shows , A/C. Confirm that the compressor clutch engages (sound or visual inspection). (Discharge air and blower speed will depend on ambient, in-vehicle and set temperatures.)

    Can the symptom be duplicated? 

    YES: GO TO  3.

    NO: GO TO 2.

  2. CHECK FOR ANY SYMPTOMS 

    Perform a complete operational check for any symptoms. Refer to "OPERATIONAL CHECK (FRONT) ".

    Does another symptom exist? 

    YES: Refer to "SYMPTOM TABLE ".

    NO: System OK.

  3. CHECK FOR SERVICE BULLETINS 

    Check for any service bulletins.

    GO TO 4.

  4. PERFORM SELF-DIAGNOSIS 

    Perform self-diagnosis to check for any codes. Refer to "A/C SYSTEM SELF-DIAGNOSIS FUNCTION ".

    Are any self-diagnosis codes present? 

    YES: Refer to "SELF-DIAGNOSIS CODE CHART ".

    NO: GO TO 5.

  5. CHECK AMBIENT SENSOR 

    Check and verify ambient sensor circuit. Refer to "AMBIENT SENSOR 1 CIRCUIT ".

    GO TO 6.

  6. CHECK INTAKE SENSOR 

    Check and verify intake sensor circuit. Refer to "INTAKE SENSOR CIRCUIT ".

    GO TO 7.

  7. RECHECK FOR ANY SYMPTOMS 

    Perform a complete operational check for any symptoms. Refer to "OPERATIONAL CHECK (FRONT) ".

    Does another symptom exist? 

    YES: Refer to "SYMPTOM TABLE ".

    NO: Replace front air control. Refer to "FRONT AIR CONTROL ".