Removal and Installation for Condenser: Removal
WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Discharge the refrigerant. Refer to "HFC-134A (R-134A) SERVICE PROCEDURE ".
- Remove the radiator. Refer to
"RADIATOR
".CAUTION: Be careful not to damage the core surface of the condenser and the radiator.
- Disconnect the front high-pressure flexible A/C hose and the front high-pressure A/C pipe from the condenser.CAUTION: Cap or wrap the joint of the pipes with suitable material such as vinyl tape to avoid the entry of air.
- Disconnect the refrigerant pressure sensor harness connector.
- Remove the refrigerant pressure sensor from the condenser.
- Lift the condenser out of the mounting grommets and remove the condenser.