LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 810 (Automatic Air Conditioner) >> Intake Door Motor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front heater and cooling unit assembly. Refer to "FRONT HEATER AND COOLING UNIT ASSEMBLY ".
  2. Remove the steering member from the front heater and cooling unit assembly.
  3. Disconnect the intake door motor electrical connector.
  4. Remove the three screws and remove the intake door motor.
scientia non olet · About LEMON Manuals