LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 810 (Automatic Air Conditioner) >> In-Vehicle Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cluster lid D. Refer to "CLUSTER LID D ".
  2. Remove the two screws and remove the in-vehicle sensor.
    Fig 1: Identifying In-Vehicle Sensor Screws
    G04913503
scientia non olet · About LEMON Manuals