Surface Distortion

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Using straightedge and feeler gauge, inspect the surface distortion of both the intake manifold and the intake manifold collector.

Fig 1: Inspecting Surface Distortion Of Intake Manifold (1 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

Limit: 0.1 mm (0.004 in)

Fig 2: Inspecting Surface Distortion Of Intake Manifold (2 Of 2)
Courtesy of NISSAN MOTOR CO., U.S.A.