LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1184 (Engine Control System - DTCS P0643 To P2A03 (VQ40DE)) >> DTC P1564: ASCD Steering Switch >> On Board Diagnosis Logic

On Board Diagnosis Logic

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

This self-diagnosis has the one trip detection logic  .

The MIL will not illuminate for this diagnosis  .

NOTE: If DTC P1564 is displayed with DTC P0605, first perform the trouble diagnosis for DTC P0605. Refer to P0605 ECM .
DTC No. Trouble Diagnosis Name DTC Detecting Condition Possible Cause
P1564
1564
ASCD steering switch
  • An excessively high voltage signal from the ASCD steering switch is sent to ECM.
  • ECM detects that input signal from the ASCD steering switch is out of the specified range.
  • ECM detects that the ASCD steering switch is stuck ON.
  • Harness or connectors (The switch circuit is open or shorted.)
  • ASCD steering switch
  • ECM