LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1184 (Engine Control System - DTCS P0643 To P2A03 (VQ40DE)) >> DTC P1564: ASCD Steering Switch >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next step.
  1. Turn ignition switch OFF and wait at least 10 seconds.
  2. Turn ignition switch ON.
  3. Turn ignition switch OFF and wait at least 10 seconds.

WITH CONSULT

  1. Turn ignition switch ON and wait at least 10 seconds.
  2. Press MAIN switch for at least 10 seconds, then release it and wait at least 10 seconds.
  3. Press CANCEL switch for at least 10 seconds, then release it and wait at least 10 seconds.
  4. Press RESUME/ACCELERATE switch for at least 10 seconds, then release it and wait at least 10 seconds.
  5. Press SET/COAST switch for at least 10 seconds, then release it and wait at least 10 seconds.
  6. Check DTC.
  7. If DTC is detected, go to "DIAGNOSIS PROCEDURE ".
scientia non olet · About LEMON Manuals