LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1180 (Engine Control System - Introduction (VQ40DE)) >> DTC/Circuit Diagnosis >> Trouble Diagnosis - Specification Value >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Perform "SPEC" of "DATA MONITOR" mode in maximum scale display.
  1. Perform "BASIC INSPECTION ".
  2. Confirm that the testing conditions indicated above are met.
  3. Select "B/FUEL SCHDL", "A/F ALPHA-B1", "A/F ALPHA-B2" and "MAS A/F SE-B1" in "SPEC" of "DATA MONITOR" mode with CONSULT.
  4. Make sure that monitor items are within the SP value.
  5. If NG, go to "DIAGNOSIS PROCEDURE ".