Diagnosis Procedure

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC WITH TCM
Check DTC with TCM. Refer to "CONSULT FUNCTION (TRANSMISSION) ".

Is the inspection result normal?

YES: GO TO 2.

NO: Perform trouble shooting relevant to DTC indicated.
CHECK DTC WITH ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
Check DTC with ABS actuator and electric unit (control unit). Refer to "CONSULT FUNCTION (ABS) ".

Is the inspection result normal?

YES: GO TO 3.

NO: Perform trouble shooting relevant to DTC indicated.
CHECK DTC WITH COMBINATION METER
Check DTC with combination meter. Refer to "CONSULT FUNCTION (METER/M&A) ".

Is the inspection result normal?

YES: GO TO 4.

NO: Perform trouble shooting relevant to DTC indicated.
CHECK OUTPUT SPEED SENSOR
Check output speed sensor. Refer to "DIAGNOSIS PROCEDURE ".

Is the inspection result normal?

YES: GO TO 5.

NO: Replace or replace error-detected parts.
CHECK WHEEL SENSOR
Check wheel sensor. Refer to "COMPONENT INSPECTION " (TYPE 1) or "COMPONENT INSPECTION " (TYPE 2).

Is the inspection result normal?

YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

NO: Replace or replace error-detected parts.