Diagnosis Procedure

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

INSPECTION START
1. Turn ignition switch ON.
2. Erase DTC.
3. Perform DTC CONFIRMATION PROCEDURE.
  See "DTC LOGIC ".
4. Check DTC.
Is the DTC P0607 displayed again?

YES: GO TO 2.

NO: INSPECTION END
REPLACE ECM
1. Replace ECM.
2. Go to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: SPECIAL REPAIR REQUIREMENT ".
: INSPECTION END