LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1158 (Engine Control System - DTCS U1000 To P0159) >> DTC P0031, P0032, P0051, P0052 A/F Sensor 1 Heater >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
  2. Fig 1: Identifying CONSULT-II Display - DATA MONITOR
    G04900036Courtesy of NISSAN NORTH AMERICA, INC.
  3. Start engine and let it idle for at least 10 seconds.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".