LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1125 (Engine Control System - DTCS P1217 Through P2A03) >> DTC P1574 ASCD Vehicle Speed Sensor >> On Board Diagnosis Logic

On Board Diagnosis Logic

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

This self-diagnosis has the one trip detection logic  .

The MIL will not light up for this diagnosis  .

NOTE:
  • If DTC P1574 is displayed with DTC U1000, U1001, first perform the trouble diagnosis for DTC U1000, U1001. Refer to "DTC U1000, U1001 CAN COMMUNICATION LINE ."
  • If DTC P1574 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC U1010 CAN COMMUNICATION ."
  • If DTC P1574 is displayed with DTC P0500, first perform the trouble diagnosis for DTC P0500. Refer to "DTC P0500 VSS "
  • If DTC P1574 is displayed with DTC P0605, first perform the trouble diagnosis for DTC P0605. Refer to "DTC P0605 ECM "
ON BOARD DIAGNOSIS LOGIC

DTC No. Trouble Diagnosis Name DTC Detecting Condition Possible Cause
P1574
1574
ASCD vehicle speed sensor ECM detects a difference between two vehicle speed signals is out of the specified range.
  • Harness or connectors

    (The CAN communication line is open or shorted.)

  • Unified meter and A/C amp.
  • ABS actuator and electric unit (control unit)
  • Wheel sensor
  • TCM
  • ECM