LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1125 (Engine Control System - DTCS P1217 Through P2A03) >> DTC P1564 ASCD Steering Switch >> On Board Diagnosis Logic

On Board Diagnosis Logic

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

This self-diagnosis has the one trip detection logic  .

The MIL will not light up for this diagnosis  .

NOTE: If DTC P1564 is displayed with DTC P0605, first perform the trouble diagnosis for DTC P0605. Refer to "DTC P0605 ECM ."
ON BOARD DIAGNOSIS LOGIC

DTC No. Trouble Diagnosis Name DTC Detecting Condition Possible Cause
P1564
1564
ASCD steering switch
  • An excessively high voltage signal from the ASCD steering switch is sent to ECM.
  • ECM detects that input signal from the ASCD steering switch is out of the specified range.
  • ECM detects that the ASCD steering switch is stuck ON.
  • Harness or connectors (The switch circuit is open or shorted.)
  • ASCD steering switch
  • ECM