LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1123 (Engine Control System - DTCS P0137 Through P0447) >> DTC P0335 CKP Sensor (Pos) >> On Board Diagnosis Logic

On Board Diagnosis Logic

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTING CONDITION AND POSSIBLE CAUSE

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0335
0335		 Crankshaft position sensor (POS) circuit
  • The crankshaft position sensor (POS) signal is not detected by the ECM during the first few seconds of engine cranking.
  • The proper pulse signal from the crankshaft position sensor (POS) is not sent to ECM while the engine is running.
  • The crankshaft position sensor (POS) signal is not in the normal pattern during engine running.
  • Harness or connectors

    (The sensor circuit is open or shorted)

  • Crankshaft position sensor (POS)
  • Signal plate
scientia non olet · About LEMON Manuals