Component Inspection
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK SEAT BELT BUCKLE SWITCH
- Turn ignition switch OFF.
- Disconnect the seat belt buckle switch LH connector.
- Check continuity between the seat belt buckle switch LH terminals 1 and 2.
1- 2
When seat belt is fastened: Continuity should not exist.
When seat belt is unfastened: Continuity should exist.
Is the inspection result normal?
YES: Inspection End.
NO: Replace the seat belt buckle switch LH.