LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1098 (Automatic Drive Positioner) >> System Description >> Automatic Drive Positioner System >> Automatic Drive Positioner System >> AUTOMATIC DRIVE POSITIONER SYSTEM: Component Description >> Control Units

Control Units

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
Item Function
Driver seat control unit
  • Main unit of automatic drive positioner system
  • It is connected to the CAN.
  • It communicates with the automatic drive positioner control unit via UART communication.
Automatic drive positioner control unit
  • It communicates with the driver seat control unit via UART communication.
  • Perform various controls with the instructions of driver seat control unit.
  • Perform the controls of the pedal adjusting, door mirror and the seat memory switch.
BCM Transmit the following status to the driver seat control unit via CAN communication.
  • Front door LH: OPEN/CLOSE
  • Ignition switch position: ACC/ON
  • Door lock: UNLOCK (with Intelligent Key or remote keyless entry request switch operation)
  • Key ID
  • Key switch: Insert/Pull out Intelligent Key or ignition key
  • Starter: CRANKING/OTHER
Combination meter Transmit the vehicle speed signal to the driver seat control unit via CAN communication.
AV control unit The setting change of auto drive positioner system can be performed on the display.
A/T shift selector (park position switch) Transmit the shift position signal (P range) to the driver seat control unit.
scientia non olet · About LEMON Manuals