LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1098 (Automatic Drive Positioner) >> Ecu Diagnosis Information >> Driver Seat Control Unit >> Reference Value >> Physical Values

Physical Values

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
Terminal No. Wire color Description Condition Voltage (V) (Approx)
+ - Signal name Input/Output
1 Ground R UART LINE (RX) Input Ignition switch ON
G04902962
3 - L CAN-H - - -
6 Ground BR/W Ignition switch (START) Input Ignition switch OFF 0
START Battery voltage
9 Ground L Reclining sensor signal Input Seat reclining Operate
G04877837
Stop 0 or 5
10 Ground L/Y Lifting sensor (rear) signal Input Seat lifting (rear) Operate
G04902964
Stop 0 or 5
11 Ground R/B Sliding switch backward signal Input Sliding switch Operate (backward) 0
Release Battery voltage
12 Ground O/B Reclining switch backward signal Input Reclining switch Operate (backward) 0
Release Battery voltage
13 Ground L/B Lifting switch (front) down signal Input Lifting switch (front) Operate (down) 0
Release Battery voltage
14 Ground G/W Lifting switch (rear) down signal Input Lifting switch (rear) Operate (down) 0
Release Battery voltage
15 Ground L Pedal switch backward signal Input Pedal switch Operate (backward) 0
Release Battery voltage
16 Ground L Sensor power supply Output - 5
17 Ground R/W UART LINE (TX) Output Ignition switch ON
G04902965
19 - P CAN-L - - -
21 Ground L A/T shift selector (park position switch) Input A/T selector lever P position 0
Except P position Battery voltage
24 Ground Y/G Sliding sensor signal Input Seat sliding Operate
G04913162
Stop 0 or 5
25 Ground R/L Lifting sensor (front) signal Input Seat lifting (front) Operate
G04902967
Stop 0 or 5
26 Ground P/B Sliding switch forward signal Input Sliding switch Operate (forward) 0
Release Battery voltage
27 Ground G/B Reclining switch forward signal Input Reclining switch Operate (forward) 0
Release Battery voltage
28 Ground Y/B Lifting switch (front) up signal Input Seat lifting switch (front) Operate (up) 0
Release Battery voltage
29 Ground R/W Lifting switch (rear) up signal Input Seat lifting switch (rear) Operate (up) 0
Release Battery voltage
30 Ground L/W Pedal switch forward signal Input Pedal switch Operate (forward) 0
Release Battery voltage
31 Ground Y Sensor ground - - 0
32 Ground B Ground (signal) - - 0
33 Ground W/L Battery power source (C/B) Input - Battery voltage
35 Ground R Sliding motor forward output signal Output Seat sliding Operate (forward) Battery voltage
Release 0
36 Ground R/W Reclining motor forward output signal Output Seat reclining Operate (forward) Battery voltage
Release 0
37 Ground B Lifting motor (front) down output signal Output Seat lifting (front) Operate (down) Battery voltage
Stop 0
38 Ground L Lifting motor (rear) up output signal Output Seat lifting (rear) Operate (up) Battery voltage
Stop 0
39 Ground L/W Lifting motor (rear) down output signal Output Seat lifting (rear) Operate (down) Battery voltage
Stop 0
40 Ground Y/R Power source (Fuse) Input - Battery voltage
42 Ground G Sliding motor backward output signal Output Seat sliding Operate (backward) Battery voltage
Stop 0
44 Ground G/W Reclining motor backward output signal Output Seat reclining Operate (backward) Battery voltage
Stop 0
45 Ground Y Lifting motor (front) up output signal Output Seat lifting (front) Operate (up) Battery voltage
Stop 0
48 Ground B Ground (power) - - 0