At Finisher Lamp

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Removal

Remove AT finisher from center console. Refer to "REMOVAL AND INSTALLATION ".
Rotate AT finisher lamp socket (2) with bulb (3) counterclockwise, then pull away from finisher (1).

Fig 1: Identifying AT Finisher Lamp Socket, Finisher And Bulb

Courtesy of NISSAN NORTH AMERICA, INC.

Installation

Installation is in the reverse order of removal.

Bulb Replacement

Remove AT finisher from center console. Refer to "REMOVAL AND INSTALLATION ".
Remove AT finisher lamp socket (1), then pull bulb (2) straight out from socket.

AT finisher lamp bulb: 12V - 3W

Fig 2: Identifying Bulb And AT Finisher Lamp Socket

Courtesy of NISSAN NORTH AMERICA, INC.