LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1093 (Ventilation System) >> Removal And Installation >> In-Vehicle Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cluster lid D. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect the in-vehicle sensor electrical connector.
  3. Remove the two screws and the in-vehicle sensor.
    Fig 1: Identifying In-Vehicle Sensor And Cluster Lid D
    G04913503Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals