Soft Seatback
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
Removal
- The seatback board is attached to the seat frame with the following:
- Two top tabs (A)
- Two side tabs (B)
- Two bottom clips (C) (must be replaced)
- Move seat to forward position.
- Hold the seatback board as shown in illustration below and pull the top of the seatback board away from the seat back frame.
- Pull the middle part of the seatback board to disengage the side tabs (A) from the seatback frame.
- Pull the lower part of the seatback board to disengage the bottom clips from the seatback frame.
Installation
Installation is in the reverse order of removal.