Inspection After Disassembly

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Case

Check the contact surfaces of the shift rod and bearing for wear and damage. If any is found, replace with a new one.

Fig 1: Locating Contact Surfaces Of Shift Rod And Bearing (Case)

Courtesy of NISSAN NORTH AMERICA, INC.

Sleeve

Check the items below. If necessary, replace them with new ones.

Damage and excessive wear of the contact surfaces of the sprocket, mainshaft and sleeve.
Sleeve must move smoothly.

Fig 2: Checking Sleeve Movements Smoothness
Courtesy of NISSAN NORTH AMERICA, INC.

Gear, Shaft and Drive Chain

Check the items below. If necessary, replace them with new ones.

Damage, peeling, uneven wear and bending of the shaft.
Excessive wear, damage and peeling of the gear.

Fig 3: Locating Damages Parts Of Gear, Shaft And Drive Chain
Courtesy of NISSAN NORTH AMERICA, INC.

Bearing

Check the bearing for damage and rough rotation. If necessary, replace it with a new one.

Fig 4: Checking Bearing Rotations

Courtesy of NISSAN NORTH AMERICA, INC.