Inspection After Disassembly

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Shift Fork

Measure the clearance between the shift fork and sleeve. If it is out of specification, replace it with a new one.
Standard value

2-4 Refer to "INSPECTION AND ADJUSTMENT "

L-H Refer to "INSPECTION AND ADJUSTMENT "

Fig 1: Measuring Clearance Between Shift Fork And Sleeve
Courtesy of NISSAN NORTH AMERICA, INC.

Shift Rod and Fork Components
Check the working face of the shift rod and fork for wear, partial wear, abrasion, bending and other abnormality. If any is found, replace with a new one.

Fig 2: Locating Damages Parts Of Shift Rod And Fork
Courtesy of NISSAN NORTH AMERICA, INC.