LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1080 (Transfer Case (TX15B)) >> Unit Disassembly And Assembly >> Front Drive Shaft >> Disassembly and Assembly >> Assembly

Disassembly and Assembly: Assembly

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear bearing using Tools.

    Tool number (A): KV38100500 (-) 

    (B): ST30901000 (J-26010-01) 

    Fig 1: Installing Rear Bearing Using Tool
    G04898604Courtesy of NISSAN NORTH AMERICA, INC.
  2. Install the front bearing using Tools.

    Tool number (A): KV38100500 (-) 

    (B): ST30901000 (J-26010-01) 

    Fig 2: Installing Front Bearing Using Tool
    G04898605Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals