LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1080 (Transfer Case (TX15B)) >> Removal And Installation >> Rear Oil Seal >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear propeller shaft. Refer to "UNIT REMOVAL AND INSTALLATION ".
  2. Remove the dust cover from the rear case.
    CAUTION: Do not damage the rear case.
    Fig 1: Identifying Dust Cover Of Rear Case
    G04901591Courtesy of NISSAN NORTH AMERICA, INC.
  3. Remove the oil cover from the dust cover.
  4. Remove the rear oil seal from the rear case using Tool.
    CAUTION: Do not damage the rear case.

    Tool number: ST33290001 (J-34286) 

    Fig 2: Removing Rear Oil Seal From Rear Case Using Tool
    G04901592Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals