LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1080 (Transfer Case (TX15B)) >> Preparation >> Preparation >> Special Service Tool

Special Service Tool

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

Tool number
(Kent-Moore No.)
Tool name		 Description
ST33290001
(J-34286)
Puller
G04875581
  • Removing front oil seal
  • Removing rear oil seal
  • Removing metal bushing
KV38100500
(-)
Drift
G04876263
  • Installing front oil seal
  • Installing rear oil seal
  • Installing rear bearing
  • Installing front bearing

  1. 80 mm (3.15 in) dia  .
  2. 60 mm (2.36 in) dia  .
KV40105310
(-)
Drift
G04901416
  • Installing dust cover

  1. 89 mm (3.50 in) dia  .
  2. 80.7 mm (3.17 in) dia  .
KV38100200
(-)
Drift
G04876266
  • Removing sun gear assembly and planetary carrier assembly
  • Removing input bearing
  • Installing sun gear assembly and planetary carrier assembly

  1. 65 mm (2.56 in) dia  .
  2. 49 mm (1.93 in) dia  .
ST30720000
(J-25405)
Drift
G04876263
  • Installing input bearing
  • Installing input oil seal
  • Installing carrier bearing

  1. 77 mm (3.03 in) dia  .
  2. 55 mm (2.17 in) dia  .
KV32102700
(-)
Drift
G04875590
  • Installing mainshaft rear bearing

  1. 48 mm (1.89 in) dia  .
  2. 41 mm (1.61 in) dia  .
KV40104830
(-)
Drift
G04901416
  • Installing input oil seal

  1. 70 mm (2.76 in) dia  .
  2. 63.5 mm (2.50 in) dia  .
ST35300000
(-)
Drift
G04901418
  • Removing carrier bearing
  • Installing metal bushing
  • Removing front bearing

  1. 59 mm (2.32 in) dia  .
  2. 45 mm (1.77 in) dia  .
ST30021000
(J-22912-01)
Puller
G04875583
  • Removing carrier bearing
  • Removing front bearing
  • Removing rear bearing
ST33710000
(-)
Drift
G04901421
  • Removing needle bearing
  • Removing metal bushing
  • Removing rear bearing

  1. 89 mm (3.5 in) 
  2. 30 mm (1.18 in) dia  .
  3. 24 mm (0.94 in) dia  .
ST35325000
(-)
Drift bar
G04901422
  • Removing metal bushing

  1. 215 mm (8.46 in) 
  2. 25 mm (0.98 in) dia  .
  3. M12 x 1.5P 
ST33220000
(-)
Drift
G08097642
 Installing needle bearing
  1. 37 mm (1.46 in) dia  .
  2. 31 mm (1.22 in) dia  .
  3. 22 mm (0.87 in) dia  .
ST27863000
(-)
Drift
G04901416
  • Installing carrier bearing

  1. 75 mm (2.95 in) dia  .
  2. 62 mm (2.44 in) dia  .
ST30901000
(J-26010-01)
Drift
G04876276
  • Installing rear bearing
  • Installing front bearing

  1. 79 mm (3.11 in) dia  .
  2. 45 mm (1.77 in) dia  .
  3. 35.2 mm (1.38 in) dia  .
scientia non olet · About LEMON Manuals