LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1080 (Transfer Case (TX15B)) >> Precaution >> Precautions >> Precaution for Transfer Assembly and Transfer Control Unit Replacement >> Method For Adjustment With 4WD Shift Switch At "4H" Or "4LO"

Method For Adjustment With 4WD Shift Switch At "4H" Or "4LO"

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine. Run the engine for at least 10 seconds.
  2. Stop vehicle and move A/T shift selector to "N" position with brake pedal depressed. Stay in "N" for at least 2 seconds.)
  3. Turn 4WD shift switch to "2WD" position. Stay in "2WD" for at least 2 seconds.
  4. Turn ignition switch "OFF".
  5. Start engine.
  6. Erase self-diagnosis. Refer to "CONSULT FUNCTION (ALL MODE AWD/4WD) ".
  7. Check 4WD shift indicator lamp and 4LO indicator lamp again. Refer to "CHECK 4WD SHIFT INDICATOR PATTERN ".

    If 4WD shift indicator lamp and 4LO indicator lamp do not indicate proper pattern, install new transfer control unit and retry the above check.

scientia non olet · About LEMON Manuals