LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1080 (Transfer Case (TX15B)) >> Periodic Maintenance >> Transfer Fluid >> Inspection >> Fluid Leakage And Fluid Level

Fluid Leakage And Fluid Level

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make sure that fluid is not leaking from the transfer assembly or around it.
  2. Check fluid level from the filler plug hole as shown.
    CAUTION: Do not start engine while checking fluid level.
  3. Install the filler plug with a new gasket to the transfer. Tighten to the specified torque. Refer to "DISASSEMBLY AND ASSEMBLY ".
    CAUTION: Do not reuse gasket.
    Fig 1: Checking Fluid Level From Filler Plug Hole
    G04896924Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals