LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1080 (Transfer Case (TX15B)) >> DTC/Circuit Diagnosis >> DTC P1808: Vehicle Speed Sensor (Abs) >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC WITH ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

    Perform self-diagnosis with ABS actuator and electric unit (control unit) for specific BRC system type.

    Is any malfunction detected by self-diagnosis? 

    YES: Check the malfunctioning system.

    NO: GO TO 2.

  2. CHECK TRANSFER CONTROL UNIT

    Check transfer control unit input/output signal. Refer to "REFERENCE VALUE ".

    Are the inspection results normal? 

    YES: GO TO 3.

    NO: Check transfer control unit pin terminals for damage or loose connection with harness connector. If any items are damaged, repair or replace damaged parts.

  3. CHECK DTC

    Drive vehicle and then perform Self-diagnosis.

    Is DTC P1808 displayed? 

    YES: Perform self-diagnosis with ABS actuator and electric unit (control unit) for specific BRC system type.

    NO: Inspection End.