LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1079 (Instrument Panel) >> Removal And Installation >> Instrument Panel Assembly >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Before servicing, turn the ignition switch off, disconnect both battery terminals, then wait at least three minutes.
  1. Disconnect both the negative and positive battery terminals, then wait at least three minutes.
  2. Remove front pillar upper finishers. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove the center console. Refer to "REMOVAL AND INSTALLATION ".
  4. Remove the combination meter. Refer to "REMOVAL AND INSTALLATION ".
  5. Remove optical sensor. Refer to "REMOVAL AND INSTALLATION ".
  6. Remove AV control unit. Refer to "REMOVAL AND INSTALLATION " (BASE AUDIO), "REMOVAL AND INSTALLATION " (MID AUDIO), "REMOVAL AND INSTALLATION " (BOSE AUDIO WITHOUT NAVIGATION) or "REMOVAL AND INSTALLATION " (BOSE AUDIO WITH NAVIGATION).
  7. Remove display unit (if equipped). Refer to "REMOVAL AND INSTALLATION " (MID AUDIO), "REMOVAL AND INSTALLATION " (BOSE AUDIO WITHOUT NAVIGATION) or "REMOVAL AND INSTALLATION " (BOSE AUDIO WITH NAVIGATION).
  8. Remove cluster lid D. Refer to "REMOVAL AND INSTALLATION ".
  9. Disconnect GPS antenna (if equipped).
  10. Remove the passenger air bag module. Refer to "REMOVAL AND INSTALLATION ".
  11. Remove the instrument stay RH/LH bolts.
  12. Disconnect all remaining harnesses and connectors.
  13. Remove instrument panel and pad assembly.
scientia non olet · About LEMON Manuals