LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1079 (Instrument Panel) >> Removal And Installation >> Center Console >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove instrument lower panel RH and lower glove box assembly. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove A/T finisher. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove center console screws, then lift center console rear base away from center console front base and disconnect harness connectors.
  4. Disconnect harness connectors and remove center console front base.
scientia non olet · About LEMON Manuals