LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1079 (Instrument Panel) >> Removal And Installation >> A/T Finisher >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cup holder finisher.
  2. Release the shift selector handle clip, then remove shift selector handle. Refer to "EXPLODED VIEW ".
  3. Pull up to release clips, disconnect the harness connectors, then remove the A/T finisher.
scientia non olet · About LEMON Manuals