LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1074 (Exterior Lighting System) >> Unit Removal And Installation >> Headlamp >> Removal and Installation >> Front Combination Lamp

Front Combination Lamp

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Removal

  1. Partially remove front portion of front fender protector. Refer to "REMOVAL AND INSTALLATION OF FRONT FENDER PROTECTOR ".
  2. Remove the front bumper. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove the front combination lamp bolts.
  4. Disconnect the front combination lamp connector and remove front combination lamp.

Installation

Installation is in the reverse order of removal.

Front combination lamp bolts: 6.0 Nm (0.61 kg-m, 53 in-lb) 

scientia non olet · About LEMON Manuals