Self-Diagnostic Procedure (Without Consult)
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
Description
If the engine starts when there is a malfunction in the 4WD system, the 4WD warning lamp turns ON or flickers in the combination meter. When the system functions properly, the warning lamp turns ON when the ignition switch is turned to ON, and it turns OFF after engine starts. To locate the cause of a malfunction, start the self-diagnosis function. The 4WD warning lamp in the combination meter will indicate the malfunction area by flashing according to the self-diagnostic results. Refer to "DTC INDEX ".
Diagnostic Procedure
- Warn up engine.
- Move A/T selector lever to P position.
- Turn 4WD shift switch to 2WD position.
- Turn ignition switch ON and OFF at least twice, and then turn ignition switch OFF.
- Turn 4WD shift switch to AUTO position.
- Turn ignition switch ON. (Do not start engine.)
- 4WD warning lamp ON.
- Move A/T selector lever to R position.
- Turn 4WD shift switch to 2WD, AUTO and 2WD in order.
- Move A/T selector lever to D position.
- Turn 4WD shift switch to 4H, AUTO and 4H in order.
- Move A/T selector lever to N position.
- Turn 4WD shift switch to AUTO position.
- Move A/T selector lever to P position.
- Read the flickering of 4WD warning lamp.
Self-diagnosis example