LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1063 (Transfer Case (ATX14B)) >> Removal And Installation >> Transfer Control Device >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Change vehicle state to 2WD, and then remove and install transfer control device.
  1. Remove front propeller shaft. Refer to "UNIT REMOVAL AND INSTALLATION ".
  2. Disconnect transfer control device connector.
  3. Remove transfer control lever.
  4. Disconnect vacuum line.
  5. Remove transfer control device.
scientia non olet · About LEMON Manuals