LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1063 (Transfer Case (ATX14B)) >> DTC/Circuit Diagnosis >> DTC P1824: Transfer Motor >> Component Inspection >> Transfer Motor

Transfer Motor

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF. (Stay for at least 5 seconds.)
  2. Remove transfer motor. Refer to "REMOVAL AND INSTALLATION ".
  3. Apply 12V direct current between transfer motor terminals 14 and 15.
  4. If transfer motor does not operate, replace transfer motor.
    Fig 1: Applying 12V Direct Current Between Transfer Motor Terminals 14 And 15
    G08165879Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals