LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1063 (Transfer Case (ATX14B)) >> Basic Inspection >> Diagnosis And Repair Work Flow >> Preliminary Check >> Preparation For Road Test

Preparation For Road Test

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

The purpose of the test is to determine overall performance of transfer case and analyze causes of malfunctions.

When a malfunction is found in any part of transfer, perform the road test to locate the malfunction area and repair the malfunction parts. The road test consists of the following three parts.

  1. CHECK BEFORE ENGINE IS STARTED
  2. CHECK AT IDLE
  3. CRUISE TEST
    Fig 1: Road Test Procedure Flow Chart
    G08165798Courtesy of NISSAN NORTH AMERICA, INC.