Removal and Installation: Installation

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION: Do not spill engine coolant in engine room. Use a shop cloth to absorb engine coolant.

Installation of Thermostat

Install the thermostat with the whole circumference of each flange part fit securely inside the rubber ring as shown.
Install the thermostat with the jiggle valve facing upwards.

Fig 1: Identifying Thermostat, Rubber Ring And Jiggle Valve
Courtesy of NISSAN NORTH AMERICA, INC.

Installation of Water Outlet Pipe and Heater Pipe

Apply mild soap to the O-ring before inserting water pipe or heater pipes.

CAUTION: Do not reuse O-rings.