LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1058 (Door & Lock (With Intelligent Key System)) >> DTC/Circuit Diagnosis >> Warning Lamp >> Key (Red) >> KEY (RED): "KEY" Warning Lamp (RED) Check

KEY (RED): "KEY" Warning Lamp (RED) Check

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK WARNING LAMP OPERATION

    With CONSULT 

    • Check "INDICATOR" in "ACTIVE TEST" mode with CONSULT.
    • Select "RED ON".

    "KEY" warning lamp (red) should illuminate.

    Without CONSULT 

    1. Turn ignition switch OFF.
    2. Ensure Intelligent Key is outside and away from the vehicle.
    3. While monitoring the combination meter warning lamps, push the ignition knob switch.
    4. The "KEY" warning lamp (red) should illuminate indicating that the Intelligent Key is not nearby.

    Is the inspection result normal? 

    YES: Inspection End.

    NO: Check combination meter. Refer to "WORK FLOW ".

scientia non olet · About LEMON Manuals