LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1058 (Door & Lock (With Intelligent Key System)) >> DTC/Circuit Diagnosis >> Hazard Function >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK HAZARD SWITCH CIRCUIT

    Operate the hazard lights by turning ON the hazard warning switch.

    Do the lights operate normally? 

    YES: Replace the BCM. Refer to "REMOVAL AND INSTALLATION ".

    NO: Repair or replace hazard warning switch circuit. Refer to "WIRING DIAGRAM ".

scientia non olet · About LEMON Manuals