Diagnosis Procedure
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK BATTERY TERMINALS CONNECTION
Check if battery terminals are clean and tight.
Is the inspection result normal?
YES: GO TO 2
NO: Repair battery terminals connection.
- CHECK FUSE
Check for blown fuse and fusible link.
Unit Power source (Power supply terminals) Fuse or Fusible Link Generator Battery (terminal 3) Fuse 30 Battery (terminal 1) Fusible Link A Combination meter Ignition switch ON (terminal 16) Fuse 14 Is the inspection result normal?
YES: GO TO 3
NO: Be sure to eliminate cause of malfunction before installing new fuse or fusible link.
- CHECK GENERATOR GROUND TERMINAL CONNECTION
Verify connector E209 terminal 5 (generator ground harness) is clean and tight.
Is the inspection result normal?
YES: GO TO 4
NO: Repair connection.
- CHECK DRIVE BELT TENSION
Check drive belt tension. Refer to "CHECKING DRIVE BELTS " (VQ40DE) or "CHECKING DRIVE BELTS " (VK56DE).
Is the inspection result normal?
YES: Inspection End.
NO: Repair as needed.