LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1055 (Maintenance) >> Periodic Maintenance >> Chassis And Body Maintenance >> Transfer Fluid >> TRANSFER FLUID: Replacement >> Draining

TRANSFER FLUID: Replacement: Draining

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Stop engine.
  2. Remove the drain plug and gasket and drain the fluid.
  3. Install the drain plug with a new gasket to the transfer. Tighten to the specified torque. Refer to "DISASSEMBLY AND ASSEMBLY ".
CAUTION: Do not reuse gasket.
Fig 1: Identifying Drain Plug
G04901436Courtesy of NISSAN NORTH AMERICA, INC.


  1. Stop engine.
  2. Remove the drain plug and gasket and drain the fluid.
  3. Install the drain plug with a new gasket to the transfer. Tighten to the specified torque. Refer to "DISASSEMBLY AND ASSEMBLY ".
    CAUTION: Do not reuse gasket.
    Fig 1: Identifying Drain Plug
    G04896925Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals