LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1052 (Front Final Drive (R180A)) >> Removal And Installation >> Side Oil Seal >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply multi-purpose grease to the lips and differential gear oil to the circumference of the new side oil seal. Then drive the new side oil seal in evenly until it becomes flush with the gear carrier using Tools.

    Tool number (A): ST30720000 (J-25405) 

    (B): ST27863000 (-) 

    Fig 1: Driving Side Oil Seal Using Tool
    G04898679Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:
    • Do not reuse side oil seal.
    • Do not incline the new side oil seal when installing.
    • Apply multi-purpose grease to the lips and differential gear oil to the circumference of the new side oil seal.
  2. Installation of the remaining components is in the reverse order of removal.
    CAUTION: Check the differential gear oil level after installation. Refer to "CHECKING DIFFERENTIAL GEAR OIL ".
scientia non olet · About LEMON Manuals