LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1052 (Front Final Drive (R180A)) >> Periodic Maintenance >> Differential Gear Oil >> Changing Differential Gear Oil >> Filling

Changing Differential Gear Oil: Filling

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the filler plug and gasket from the front final drive assembly.
  2. Fill the front final drive assembly with new differential gear oil until the level reaches the specified level near the filler plug hole.

    Differential gear oil grade and capacity: Refer to  "FOR USA AND CANADA: FLUIDS AND LUBRICANTS " (United States and Canada), "FOR MEXICO: FLUIDS AND LUBRICANTS " (Mexico).

    Fig 1: Inspecting Fluid Level From Filler Plug Hole
    G04901824Courtesy of NISSAN NORTH AMERICA, INC.
  3. Install the filler plug with a new gasket on it to the front final drive assembly. Tighten to the specified torque. Refer to "DISASSEMBLY AND ASSEMBLY ".
    CAUTION: Do not reuse gasket.
scientia non olet · About LEMON Manuals