LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1050 (Automatic Transmission) >> Removal And Installation >> Rear Oil Seal >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear propeller shaft. Refer to "UNIT REMOVAL AND INSTALLATION " (2S1330), "UNIT REMOVAL AND INSTALLATION " (2S1350).
  2. Remove transfer from transmission (4WD models). Refer to "UNIT REMOVAL AND INSTALLATION " (ATX14B), "UNIT REMOVAL AND INSTALLATION " (TX15B).
  3. Remove rear oil seal using suitable tool.
    CAUTION: Do not scratch rear extension assembly (2WD models) or adapter case assembly (4WD models).
    Fig 1: Removing Rear Oil Seal Using Flat-Bladed Screwdriver (2WD And 4WD Models)
    G08165512Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals