Connecting Rod Side Clearance
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Measure side clearance between the connecting rod and crankshaft arm using suitable tool.
Standard: 0.20 - 0.40 mm (0.0079 - 0.0157 in)
Limit: 0.40 mm (0.0157 in)
- If measured value exceeds the repair limit, replace the connecting rod bearings, and measure again. If it still exceeds the repair limit, replace the crankshaft also.